This complete PA System for DJs includes the B-52 Prodigy FX DJ Workstation, the B-52 Matrix 2000 Speaker Sound System, a 20' Live Wire Microphone Cable, a ProLine Speaker Stand, and the Stanton DJ Pro 300 Single-Side Headphone.
B-52 Prodigy FX DJ Workstation The Prodigy FX is an all-in-one solution will elevate your performance to the next level. It's loaded with features that every DJ needs and wants including a wide array of DSP effects with parameter controls, master tempo, sampler, hot cues, integrated fader start, three-band EQ on every channel with kill switches, 3 microphone inputs with dedicated DSP reverb, dual rail Accutrack VCA crossfader, crossfader curve control, seamless loop, effects loop and CD direct outputs and mixer inputs for use with Serato Scratch Live, Synchroscience TORQ and all other time coded systems.
B-52 Matrix 2000 Speaker Sound System The B-52 Matrix 2000 Speaker Sound System consists of two 12" two-way speakers, an 18" subwoofer with a 3-channel amplifier, and circuitry housed in a separate compartment on the sub unit's back. A 600W amp drives the subs, and two 300W amps drive the two ways. All of the components are matched for the best possible sound and balance with minimal tweaking. All you have to do is connect the Matrix 2000 system components, plug in the power cord, plug in your mixer or other sound source, and you're ready to go!
The B-52 subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the cast-frame, 4" voice coil and 18" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply, compressor, and preamps. The subwoofer has a power handling capability of 600W and a nominal impedance of 8 ohms.
Each 12" two-way Matrix 2000 speaker is loaded with a B-52 custom-designed 12" woofer and a 1" titanium diaphragm compression driver, mounted to a 90° x 40° constant directivity horn. The speakers can be pole mounted, used as stage monitors, or flown with built-in 3/8" 16 TPI hardware for permanent installations. For transport, they mount onto the subwoofer's front grille.
Transporting the Matrix system is easy: Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer's front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet.
The B-52 Matrix 2000 Speaker Sound System has a limited lifetime warranty on cabs and compression drivers; 5-year warranty on speakers; 2-year warranty on am
|
Browse All Products 